Canon PIXMA MX310 - Manual (Page 85)

81 Troubleshooting
LCD Cannot Be Seen At All
An Unintended Language Is Displayed on the LCD
Cause Action
The machine is not powered on or the
LCD is in the screen-saver mode.
z If the Power lamp is off
The machine is not powered on. Connect the power cord and press the ON/
OFF button. The machine will power on and the LCD will display a message.
z If the Power lamp is lit
The LCD may be in the screen-saver mode. On the Operation Panel, press a
button other than the ON/OFF button.
Cause Action
The language you want to be displayed
is not selected. Select the language according to the following procedure.
(1)Press the ON/OFF button to turn on the machine.
(2)Press the Menu button three times.
(3)Press the ] button twice, then press the OK button.
(4)Press the ] button once, then press the OK button.
(5)Press the [ button repeatedly to select the leftmost language.
(6)Press the ] button the number of times in the following list according to your
desired language.
– JAPANESE: 0 time
– ENGLISH: 1 time
– GERMAN: 2 times
– FRENCH: 3 times
– ITALIAN: 4 times
– SPANISH: 5 times
– DUTCH: 6 times
– PORTUGUESE: 7 times
– NORWEGIAN: 8 times
– SWEDISH: 9 times
– DANISH: 10 times
– FINNISH: 11 times
– RUSSIAN: 12 times
– CZECH: 13 times
– HUNGARIAN: 14 times
– POLISH: 15 times
– SLOVENE: 16 times
– TURKISH: 17 times
(7)Press the OK button.
The desired language is displayed on the LCD.
(8)Press the Stop/Reset button.