Canon PIXMA MX310 - Manual (Page 53)

49 Faxing
z If You Are Using a Single Telephone Line for Faxes and Voice Calls and
Want to Receive Faxes Automatically:
Select FAX PRIORITY MODE.
(A) Incoming call
(B) Voice call: The machine will ring. Pick up the handset, then press the Stop/Reset button to
answer the call.
(C) Fax: The machine receives faxes automatically.
Note
z Set your answering machine to answering mode and adjust it as follows:
– The entire message should be no longer than 15 seconds.
– In the message, tell your callers how to send a fax.
z The machine can be set to receive faxes automatically after the telephone rings for a specified
length of time. Set MAN/AUTO SWITCH in RX SETTINGS under FAX SETTINGS to ON, and
then specify the automatic reception start time. Refer to “MAN/AUTO SWITCH” in “FAX
SETTINGS” of the User’s Guide on-screen manual.
z If you have subscribed to Duplex Ringing service in Hong Kong, the machine will receive faxes
automatically even if you set the receiving mode of the machine to TEL PRIORITY MODE.
Important
When answering a voice call, be sure to pick up the handset before pressing the Stop/Reset
button. If you press the Stop/Reset button before picking up the handset, the telephone call will be
disconnected.
Note
The following settings can be modified to control how the machine handles incoming calls. Specify
the FAX PRIORITY MODE settings in RX SETTINGS under FAX SETTINGS. Refer to “FAX
PRIORITY MODE” in “FAX SETTINGS” of the User’s Guide on-screen manual.
z
The time the machine takes to determine whether a call is a fax or a voice call
z The time the machine rings when the call was a voice call
z Whether or not the machine receives the fax after the specified ring time has elapsed
(A)
(C)
(B)