Canon PIXMA MX310 - Manual (Page 62)

58 Faxing
„ User’s Data List
The User’s data list enables you to confirm the current settings of the machine as well as the
registered sender information. See “Registering Sender Information” on page 34.
z Printing the User’s Data List
1
Press the FAX button, then press the Menu button.
2
Press the [ or ] button to select PRNT REPORT/LIST, then press the OK button.
3
Press the [ or ] button to select USER’S DATA LIST, then press the OK button.
The User’s data list is printed.
„ Other Lists
z TX Report
The machine can print a TX (transmission) report after sending a document, confirming whether
the transmission was completed successfully. You can set the machine to print every time it
sends a document, or only when an error occurs. Alternatively, you can disable printing of the
report.
z RX Report
The machine can print an RX (reception) report after receiving a document, confirming whether
the reception was completed successfully. You can set the machine to print every time it
receives a document, or only when an error occurs. Alternatively, you can disable printing of the
report.
Note
z For details on the TX report setting, refer to “TX REPORT” in “FAX SETTINGS” of the User’s
Guide on-screen manual.
z The default setting is PRINT ERROR ONLY.
Note
z For details on the RX report setting, refer to “RX REPORT” in “FAX SETTINGS” of the User’s
Guide on-screen manual.
z The default setting is DO NOT PRINT.