Casio CTK-691 - Manual (Page 53)

E-51
Registration Memory
You can assign setups into one of 32 areas, which you can
select using BANK buttons 1 through 4 and the four
REGISTRATION buttons. Area names range from 1-1
through 8-4 as shown below.
Š Whenever you save a setup and assign it a setup name,
any setup data previously assigned to that name is
replaced with the new data.
Š You can use the keyboard’s MIDI capabilities to save your
setup data to a computer or other external storage device.
See “Using the Data Download Service” on page E-82 for
details.
1.
Select a tone and rhythm, and otherwise set up
the keyboard the way you want it.
Š See “Registration Memory Settings” on page E-50
for details on what data is stored in the
registration memory.
2.
Use the BANK button or the number buttons to
select the bank you want.
Š If you do not perform any operation for about
five seconds after pressing the BANK button, the
display returns to the contents in step 1, above.
Š Bank 1 selected.
3.
While holding down the STORE button, press a
REGISTRATION button (1 to 4).
Š The following display appears when you press
the 2 button.
4.
Release the STORE and REGISTRATION
buttons.
Š The setup is saved as soon as you press a
REGISTRATION button in step 3, above.
Setup Names
1 Use the BANK button to select the bank. Each press of
BANK cycles through the bank numbers from 1 to 8.
2 Pressing one of the REGISTRATION buttons (1 to 4)
selects the corresponding area in the currently selected
bank.
To Save a Setup in Registration
Memory
705A-E-053B