Casio CTK-691 - Manual (Page 88)

Specifications
E-86
* The same memory area is used to store waveform data, accompaniment data, and SMF data.
Mixer Function
Š Channels:
Š Parameters: 16
Tone; part on/off; volume; pan pot; octave shift; coarse tune; fine tune; reverb send;
chorus send; DSP line; DSP level; DSP pan; DSP system reverb send; DSP system
chorus send
MIDI: 16 multi-timbre receive, GM Level 1 standard
Other Functions
Š Transpose:
Š Tuning:
Š LCD: 49 steps (–24 semitones to +24 semitones)
Variable (A4 = approximately 440Hz ±100 cents)
Adjustable contrast
SMF Player Flash memory storage for up to 200 files*
Š Supported Format: SMF0
Flash Memory Capacity: 2MB
Shared Area: Approximately 1.5MB (waveform data, accompaniment data, SMF data)
Š Further storage of waveform, accompaniment, and SMF data becomes impossible
after the total of such data reaches approximately 1.5MB.
Terminals
Š MIDI Terminals:
Š Sustain/Assignable Terminal:
Š Headphone/Output Terminal:
Š Power Supply Terminal:
IN, OUT
Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Stereo standard jack
Output Impedance: 140
Ω
Output Voltage: 4.5V (RMS) MAX
9V DC
Power Supply:
Š Batteries:
Š Battery Life:
Š AC Adaptor:
Š Auto Power Off:
Dual power supply system
6 D-size batteries
Approximately 4 hours continuous operation on manganese batteries
AD-5
Turns power off approximately six minutes after last key operation. Enabled under
battery power only, can be disabled manually.
Speaker Output: 3W + 3W
Power consumption: 9V 7.7W
Dimensions: 96.0 x 37.5 x 14.6 cm (37 13 /
16
x 14 3 /
4
x 5 3 /
4
inch)
Weight: Approximately 5.6 kg (12.3lbs) (without batteries)
705A-E-088A