Colorlight CL20 - Manual (Page 40)

MAIN MENU
Page 40 User’s Manual
11.8.6.2 Store park position
This menu enables the storing of a park position (lamp housing pointing at any direction when
the “Park” command is selected.
Before changing the default park position it’s necessary that the synchronization between
operator panel and electrical box is done properly. The easiest way to do the synchronization is
by just turn the system off with the “Park” command, please see
10.6 Off and park.
From the default logo screen or display indicator*-screen, move the searchlight to the new
desired park position and when satisfied select menu>settings>Installation and enter sub
menu “Store park position”.
Press “OK” to save the new park position and return to the default logo screen or display
indicator*-screen
ColorLight recommend that the park position should be approximately 75 degrees down for
CL20/CL25 and 50 degrees down for CL35 on the vertical axis relatively to the horizontal plane.
This recommended parking position is the default setting from factory and also the most
effective position to avoid sand, rain, snow etc. to hit the glass in front of the lamps.