Colorlight CL20 - Manual (Page 30)

QUICK START MENU
Page 30 User’s Manual
10.5.1 Set the master control searchlight on/off
The master is the searchlight that you actively control with your operator panel and it is the
master
’s indicator and error message that is displayed in the operator panel display.
Light icons however, changes to the configurations that are available in the group at the
moment.
If the master has two white lights (11) and you add a slave who has one white and one UV (12),
the master's indicator field will immediately update so that there is a UV light available in the
group.
Once you have switched over to the searchlight which you want to be master in the system,
press the "Sync" button, In this case, we choose CL35 CENTER as our master.
The arrow in front of the selected CL35 CENTER tells us that this system is the "master" in the
network and if the sync function is activated all the slaves will follow the masters movement.
Important, to add and remove slaves, please see
10.5.2 Add and remove slaves.
To disconnect the master and run the CL35 CENTER searchlight as a single searchlight go into
the
“Switch” submenu, navigate to the master searchlight and press the “Single” button.