Colorlight CL20 - Manual (Page 34)

MAIN MENU
Page 34 User’s Manual
11.6 Info
This menu shows information that is needed to be known during support from ColorLight or if
any optional functions should be added to the operator panel after purchase (more about this
under
11.8.6.7 Options setup ).
11.7 Status
This menu will give information in form of text messages if there is errors.in the system, it also
contains
a “bulb life” counter showing total burning time in hours.
Errors can be reset from this menu by simply press the button marked “Dismiss”, if errors
persist despite resetting, contact ColorLight.
Message Fault Remedy
Communication error
Transmission issues on the CAN
bus Check for loose wires in the
electrical box and contact
ColorLight.
Over current
Overcurrent protection triggered,
movement blocked Make sure that the searchlight is
able to rotate freely.
In winter, heavy icing can be the
cause of this error.
Over voltage
Overvoltage protection triggered,
voltage to searchlight motordriver/s
have exceeded 30Vdc. Reset the error, if error recurs
repeatedly, please contact
ColorLight.
Under voltage
Undervoltage protection triggered,
voltage to searchlight motordriver/s
has fallen below 10Vdc
Reset the error, if error recurs
repeatedly, please contact
ColorLight.