Humboldt H-3185B CONTROLLER - Manual (Page 13)

- 13 -
© 2008 Humboldt Manufacturing
Figure 9
3. Press the Mode button and the green display will show the first cycle recipe
setting. The green display should alternate between “rOPt” (Figure 10) and
“8.r.S”. There are three setting options: “8.r.S”, “S.SP.r”, and “diS”. The
settings can be changed by pressing the up or down arrow buttons .
This setting should remain on “8.r.S”. Otherwise, the recipe function will not
cycle between the two temperature set points.
Figure 10