Precautions when installing the printer, Caution – Citizen Systems Citizen CD-S500 User Manual

Page 13

Advertising
background image

11

English

Caution

• Prior to operation, read the safety instructions carefully and observe them.
• Do not use or store the printer near fire, excessive moisture, in direct sunlight,

near an air conditioner or heater or other source of unusually humidity or
excessive dust.

• Do not place the printer where chemical reactions occur, such as in a

laboratory.

• Do not place the printer where air is mixed with salt or gas.
• The printer must sit on a firm, level surface where there is ample ventilation.

Never allow the printer's air vent to be blocked by an object.

• Do not put anything on the top of printer.
• Do not place the printer near a radio or television, and do not use the same

wall outlet for the printer and radio or television. Radio or television reception
could be adversely affected.

• Do not put anything on the power cord or step on it.
• Do not drag or carry the printer with the power cord or interface cable.
• Avoid plugging the power cord into an outlet with many loads.
• Do not bundle the power cord when inserting the plug.
• Always grip the plug housing, not the cord, to plug/unplug the power cord.
• Make certain the power is turned off before connecting/disconnecting the

interface cable.

• Avoid lengthening the signal cable or connecting it to any noise-producing

device. If it is unavoidable, use the shielded cable or twisted pair for each
signal.

• Place the printer near the outlet where the power cord can be unplugged

easily to shut off power.

• Use the AC outlet that accepts a three-pronged plug. Otherwise, static

electricity may be generated and there will be danger of electric shock.

• Do not carry it holding the cover.

Doing this might break its mechanisms or cause it to malfunction.

Precautions When Installing the Printer

Advertising