ClearSounds ANS3000 - Manual (Page 13)

13 – ENGLISH
█
Volume Control
When playing the OGM or messages, press the Vol+ or Vol-
key to increase or decrease the voice volume. The LED will
show the corresponding volume level (10 levels).
█
Speed Control
There are 3 levels of message playback speed and you can
adjust the playback speed to your needs. To set the speed:
1. Press and hold the Speed key until the current
setting is displayed.
2. Press the Speed key repeatedly to adjust the speed. Every
time you press this key, the LED shows the current setting
(P1, P2 or P3) and you will hear “1,2,3” announced at the
corresponding speed . At level 1, the messages will be
played back at a normal speed. At level 2, the messages
will be played back at a slower speed and at level 3, the
messages will be played back at the slowest speed.
3. When the desired speed is displayed, press and hold the
Speed key and you will hear a confirmation beep.
Note: You can not adjust the speed in the middle of
message playback.
█
Remote Access
You can access many features of your answering machine
remotely from any touch tone phone. A four-digit PIN is
required to access the system and the default PIN is ‘0000’
(See Remote Access Code for instructions on changing the
PIN). To enter remote access:
1. Dial your telephone number from any touch tone telephone.
2. When the outgoing message starts to play, you may
enter the PIN.