Please do not return this product to the store, Roubleshooting manual/hose cleaning – Bissell Spot Bot 88D6 series User Manual
Page 13
13
w w w . b i s s e l l . c o m
T
roubleshooting
Manual/Hose Cleaning
Cleaner will not run
Possible Causes
Remedies
1.
Power cord not plugged in.
1. Check electrical plug.
2.
Vacuum flex hose not removed from receiver.
2. Remove vacuum flex hose.
Unusual or Odd Noise
Possible Causes
Remedies
1.
Clean/solution tank is out of fluid.
1. Fill clean/solution tank.
Reduced or No Spray
Possible Causes
Remedies
1.
Spray tip clogged on Tough Stain Brush.
1. Clean spray tip.
2.
Clean/solution tank is out of fluid.
2. Fill Clean/solution tank.
3.
Clean/solution tank is not inserted
3. Gently press the clean/solution
into the unit securely.
tank until you see “bubbles”
coming from the base of the tank.
No Suction
Possible Causes
Remedies
1.
Dirty/collection tank is full.
1. Empty dirty/collection tank.
2.
Dirty/collection tank latch is not down.
2. Push latch down securely
into place.
3.
Black valve on the dirty/collection
3. Replace black valve into dirty/
tank is missing.
collection tank.
Other maintenance or service not included in this manual should be performed by an
authorized service representative.
Thank you for selecting a bISSEll product.
Please do not return this product to the store.