Bissell 12R7E - Manual (Page 6)

w w w . b i s s e l l . c o m
0
perations
6
special tools
your bissell cleanView compact is not
only a powerful carpet and rug vacuum
cleaner, it’s also a versatile bare floor
and above floor vacuum cleaner when
you select one of the special tools.
floor nozzle:
Use to vacuum carpets, rugs and bare
floors. swivel head turns to get into tight
spaces and fits under cabinets.
1. To vacuum carpets and rugs, push the brush
switch to the carpet position . This
will pull the brushes up into the floor nozzle.
2. To vacuum bare floors, push the brush
switch to the bare floor position .
This will extend the brushes down from the
floor nozzle.
combination crevice tool/dusting brush:
Use the crevice tool in tight, narrow spaces.
Use the dusting brush to clean curtains,
draperies, cushions and fabrics.
air flow regulator
open the air flow regulator by
sliding the regulator down towards
the extension wand to an open
position. this will reduce the suction
power for vacuuming delicate fabrics.
for full suction power, close the air
flow regulator by sliding the
regulator up to the closed position.
empty the dirt cup
empty the dirt cup as soon as the dirt
reaches the “full” lines on the sides of
the dirt cup.
1. Unplug the vacuum from the electrical outlet.
2. Remove the hose by turning the hose
connector counter clockwise and pulling it
out from the suction inlet. set hose aside.
3. Press the dirt cup release button on the carry
handle and lift up to remove the dirt cup.
1.
2.
Brush Down
Brush Up
Tip:
Before cleaning under low furniture,
check area first for objects that might
harm the unit or block the hose.
Tip:
Hair, string and small objects can
block the hose and tools. Check
them occasionally for obstructions.
Tip:
Use the air flow regulator to reduce air
flow as needed when using the tools.
2.
3. Dirt Cup
Release Button
M
aintenance and care