Bissell 12R7E - Manual (Page 8)

w w w . b i s s e l l . c o m
M
aintenance and care
8
8. Insert the dirt cup filter assembly back into
the dirt cup by lining up the tabs on the
top of the dirt cup filter assembly with the
notches inside the top of the dirt cup and
turning the handle on the bottom of the
dirt cup filter assembly clockwise to lock
into place.
cleaning the pre-motor filter
the pre-motor filter protects the
motor from dirt and dust particles.
use only bissell replacement filters
in your cleanView compact.
1. Remove the dirt cup from the vacuum,
following steps 1-3 of emptying the dirt
cup on page 6.
2. The pre-motor filter is located between
the power button and the automatic cord
rewind button.
3. The pre-motor filter can be hand washed
in cold water with a mild detergent. Rinse
well and air dry thoroughly before placing
back into the vacuum.
Replacing the post-motor filter
the post-motor filter assists in
the filtration process to return
cleaner air to the room. use only
bissell replacement filters in your
cleanView compact.
1. Unplug the vacuum from electrical outlet.
2. Remove the filter door (located on the back
of the vacuum) by pushing down on the tab
and pulling out and away from the vacuum.
3. The post-motor filter can be hand washed
in cold water with a mild detergent. Rinse
well and air dry thoroughly before placing
back into the vacuum.
4. Replace the filter door by placing the tabs
on the bottom of the filter door into the
notches on the bottom of the post-motor filter
compartment and pushing the tab forward
back into the vacuum to lock into place.
cleaning the dirt cup filters continued
Washable
Pre-Motor
Filter
notice:
This product is intended for household use
only and not for commercial or industrial
use. Vacuuming of dust from products like
plaster, concrete or ashes will damage the
motor and void the warranty.
Tip:
For maximum cleaning performance,
check the filters often and clean or
replace if necessary.
WaRning:
Do not operate cleaner with damp
or wet filters or without all filters in
place.
3.
2.