Bissell 2177 - Manual (Page 7)

cleaning with the removable pod
The lift-Off™ vacuum pod easily detaches from
the vacuum base for cleanups on stairs and in
other hard-to-reach areas in your home.
before removing the pod, your vacuum must be
in its fully upright position. You do not need to
turn off the power before removing the pod.
1. Press the lift-Off™ pod release button at the
base of the vacuum handle and lift the vacuum
pod off its base.
2. Grasp the hose wand grip and lift to separate
the hose from the hose wand base.
3. Connect the desired hose attachment to the
hose wand, or use the hose wand on its own.
4. When you’re finished using the desired hose
attachment, remove the hose attachment from
the hose wand and reconnect the hose wand to
the hose wand base.
5. Return the vacuum pod to the vacuum base
by aligning the pod base to the vacuum base.
Push the pod onto the vacuum base until it
‘clicks’ into place.
power cord storage
When you are done using your vacuum, return it
to the upright position and store the power cord.
1. Turn vacuum cleaner off.
2. Unplug power cord by grasping the plug
(NOT the cord) and disconnect from outlet.
3. loop power cord around cord wraps on side
of the pod.
4. Clip molded plug to power cord to secure.
transporting cleaner
1. To move your vacuum cleaner from room
to room, put the handle in the upright position,
tilt the cleaner back on its rear wheels and
push forward.
2. The vacuum can also be transported by
grasping the carry handle on the lift-Off™
vacuum pod.
www.bissell.com
800.237.7691
7
Operations
WaRnInG
While the vacuum is in use, warm air is emitted through
the post-motor filter on the front of the pod. The
bottom of the pod may also become warm.