Bissell 4105E - Manual (Page 4)

w w w. b i s s e l l . c o m
4
WaRning:
Electric/electronic appliances
should not be subjected to
extreme temperatures or high
humidity. Do not store the
Supreme Sweep Turbo in
bathing areas or close to
stoves, furnaces or radiators.
P
roduct view
Handle
Assembly
Metal Extension Handle
Power Switch
Charging Port
DC Adapter
Charging
Indicator Light
Handle Clip
Dirt Cup
Rotating Brush
Dual Edge
Cleaning Brushes
Handle Grip
A
ssembly
The Supreme Sweep Turbo requires very little
assembly. Remove it from the box and check
it against the illustration to familiarize yourself
with the components listed. The exploded view
drawing with part names will also be helpful if
you should need to order a part at a later time.
1. Assemble the handle by screwing together two
pieces of the metal extension handle. Place the
colored handle grip on top of the metal exten-
sion assembly and twist clockwise until secure.
Screw the handle clip into the bottom of the
metal extension handle assembly.
2. Place bottom of handle clip into the open-
ing at the top of the Supreme Sweep
Turbo. Push firmly until the button at the
bottom “clicks” into place in the opening.
3.
The Supreme Sweep Turbo must be fully
charged before using. To charge the unit,
plug the DC adapter into a standard
electrical outlet (220-240 V – 50/60 Hz);
plug the opposite end into the charging port
on the back side of your Supreme Sweep
Turbo. The charging indicator light will illumi-
nate when properly connected and will not
turn off when fully charged. The Supreme
Sweep Turbo is now charging.
note: the power switch must be in
the off position when charging.
Charging cord
with DC adapter
plug
Plug into charging
port on the motor
side of the Supreme
Sweep Turbo.