Bissell 4105E - Manual (Page 6)

10 Screws
w w w. b i s s e l l . c o m
M
aintenance and care
6
using your supreme sweep turbo
1. Make sure that the Supreme Sweep Turbo
is in the “OFF” position.
2. With the sweeper facing toward you,
lift the dirt cup out.
3. Carry the dirt cup to a waste container
and empty.
4. Replace the dirt cup by gently pressing
it into the foot of the sweeper. Make sure
that it fits securely.
5. Clean exterior surfaces with a soft cloth
dampened with water only. Do not use
a strong detergent or other cleaner – this
may damage the finish. Always unplug the
Supreme Sweep Turbo from the electrical
outlet before cleaning the surface.
battery Removal and disposal
note: it is required that the battery
be removed from the supreme
sweep turbo before it is disposed of.
1. Important: Unplug charger.
2.
Remove handle and dirt cup.
3. Remove (10) Phillips head screws on
the bottom cover as shown in picture.
4.
Separate top and bottom cover.
5. Remove wire connectors from the
battery pack.
6. Keep battery pack together – DO NOT
separate individual batteries. For specific
disposal instructions, please contact your
local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
7. Discard remainder of product.
2.
3.
WaRning:
This product contains a recharge-
able nickel metal hydride
battery (sometimes referred to
as a “NiMH” battery) pack. The
average life of a NiMH battery
is 5 to 7 years, depending on
frequency of use. Proper removal
and disposal of NiMH batteries
is required.
WaRning:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect charger from
electrical outlet before performing
maintenance or troubleshooting.