Bissell 7364e - Manual (Page 4)

w w w. b i s s e l l . c o m
4
WaRning:
electric/electronic appliances
should not be subjected to extreme
temperatures or high humidity.
do not store the pet hair eraser
sweeper in bathing areas or close
to stoves, furnaces or radiators.
P
roduct view
handle
assembly
Metal extension handle
power switch
Charging port
dC adapter*
Charging
Indicator light
handle Clip
dirt Cup
rotating brush
Corner bumpers
handle grip
A
ssembly
the pet Hair eraser sweeper requires very
little assembly. Remove it from the box
and check it against the illustration to
familiarize yourself with the components
listed. the exploded view drawing with
part names will also be helpful if you
should need to order a part at a later time.
1. Assemble the handle by screwing together two
pieces of the metal extension handle. Place the
colored handle grip on top of the metal exten-
sion assembly and twist clockwise until secure.
Screw the handle clip into the bottom of the
metal extension handle assembly.
2. Place bottom of handle clip into the
opening at the top of the Pet Hair Eraser
Sweeper. Push firmly until the button at the
bottom “clicks” into place in the opening.
3. The Pet Hair Eraser Sweeper must be fully
charged before using. To charge the unit, plug
the DC adapter into a standard electrical outlet
(220-240 V – 50/60 Hz); plug the opposite
end into the charging port on the back side of
your Pet Hair Eraser Sweeper. The charging
indicator light will illuminate to red when prop-
erly connected and will change to the color
green when full charged. The Pet Hair Eraser
Sweeper is now full charged.
note: the power switch must be in
the off position when charging.
Charging cord
with DC adapter*
plug
Plug into charging
port on the motor
side of the Pet Hair
Eraser Sweeper.
*Adapter plug varies by country of sale.