Bissell 9151e - Manual (Page 6)

10 Screws
w w w. b i s s e l l . c o m
M
aintenance and care
6
1. Make sure that the Superb Sweep Turbo is
in the “OFF” position.
2. With the sweeper facing toward you, lift
the dirt cup out.
3. Carry the dirt cup to a waste container
and empty.
4. Replace the dirt cup by gently pressing it
into the foot of the sweeper. Make sure
that it fits securely.
5. Clean exterior surfaces with a soft cloth
dampened with water only. Do not use
a strong detergent or other cleaner – this
may damage the finish. Always unplug the
Superb Sweep Turbo from the electrical
outlet before cleaning the surface.
battery Removal and disposal
note: it is required that the battery
be removed from the superb sweep
turbo before it is disposed of.
1. Important: Unplug charger.
2. Remove handle and dirt cup.
3. Remove (10) Phillips head screws on the
bottom cover as shown in picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the battery
pack.
6. Keep battery pack together – DO NOT
separate individual batteries. For specific
disposal instructions, please contact your
local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
7. Discard remainder of product.
2.
3.
WaRning:
This product contains a
rechargeable nickel metal
hydride battery (sometimes
referred to as a “NiMH” battery)
pack. The average life of a
NiMH battery is 5 to 7 years,
depending on frequency of use.
Proper removal and disposal of
NiMH batteries is required.
WaRning:
To reduce the risk of electric
shock, turn power switch
OFF and disconnect charger
from electrical outlet before
performing maintenance or
troubleshooting.
using your superb sweep turbo