Drew Technologies CarDAQ-M - Manual (Page 5)

5
Setting up the CarDAQ-M
Do not connect the CarDAQ-M to your PC until you
have installed the software below.
Installing the CarDAQ-M Software to your PC
1. Insert the CD that came with your CarDAQ-M into the CD/DVD slot of
your PC. Make sure your CarDAQ-M is not connected to the PC at this
point. The Autoplay options will appear:
2. Click on [Run setup.exe] to begin the installation.
3. The J2534 ToolBox, Tech2Win Driver and the CarDAQ-M drivers
will now begin installation. Follow the Setup Wizard instructions.
4. When the installation is finished, power up your CarDAQ-M from a
vehicle with the OBDII cable.
5. Connect the USB cable from CarDAQ-M to your PC. The drivers
will automatically be found and installed on Windows Vista and 7
computers.
For Windows XP, a few more steps are required: