EcoPure MW_MW15_450217 - Manual (Page 4)

DESIGN SPECIFICATIONS / DIMENSIONS
MW-15
RATED CAPACITY See Rating Decal Located On The Softener
RATED EFFICIENCY !
AMOUNT OF HIGH CAPACITY RESIN (lbs / cu ft)
26.0 / .50
RESIN TANK NOMINAL SIZE (in., dia x height) 8 x 25
SERVICE FLOW RATE (gpm) See Rating Decal Located On The Softener
PRESSURE DROP AT RATED SERVICE FLOW (psig)
WATER SUPPLY MAXIMUM HARDNESS (gpg)
30
WATER SUPPLY MAX. CLEAR WATER IRON (ppm)! 4
WATER PRESSURE LIMITS (min. / max. psi) " 20 - 125
WATER TEMPERATURE LIMITS (Min. / Max. oF) 40 - 120
WATER SUPPLY MINIMUM FLOW RATE (gpm) 3
FLOW TO DRAIN DURING REGENERATION (gpm) 2.2
! Capacity to reduce clear water iron is substantiated by WQA test data.
This softener conforms to NSF/ANSI 44 for the specific capacity claims as verified and substantiated by test data.
!" Efficiency rating is valid only at the minimum stated salt dose. This softener was efficiency rated according to NSF/ANSI 44.
"#
Maximum pressure for Canadian use is 100 psi.
MW-15
4