Programming the faceplate timer, Step 1. set time of day – EcoPure MW_MW30_7339971A User Manual
Page 17
17
Miracle Water Installation & Operation Manual
Programming the Faceplate Timer
Figure 12
If you have questions about installation, programming, operating and routine maintenance...
call 1-800-356-7851
When the transformer is plugged into the electrical outlet, a model code and a test number (exam-
ple: J2.0), begins to flash in the faceplate display. Then, 12:00 AM and PRESENT TIME begins to
flash.
NOTE: If - - - - shows in the display, press the UP p or DOWN q button until LE31 shows.
Then, press the SELECT/ MENU button to set, and change to the flashing
PRESENT TIME display.
Step 1. Set Time of Day
If the words PRESENT TIME do not show in the display, press the (Select/Menu) button
until they do.
1. Press the UP p or DOWN q buttons to set the present time. UP p moves the display ahead;
DOWN q moves the time backward.
Be sure AM or PM, is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold for fast
advance. This procedure applies for all following settings.
SELECT
MENU
SELECT
MENU
RECHARGE
TONIGHT (Press)
NOW (Hold for 3 seconds)
SELECT
MENU
www.leaumiraclewater.ca
1--800--356-7851
CE SOIR (Appuyer)
MAINTENANT (Tenir appuyer)
UP button
Display
RECHARGE button
DOWN button
SELECT/MENU button