Edge Lighting Cody LED Picture Light - Manual

Installation Instructions for Cody 12" Plug-In Picture Light
904-CPL-12-P-01
1
CPL-12-_-P 1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
[email protected]
© 2009 Edge Lighting. All Rights Reserved.
SAVE THESE INSTRUCTIONS!
- This product is ETL listed for indoor location.
- This product is wall mounted only.
- This instruction shows a typical installation.
IMPORTANT INFORMATION
ARM 1.5MM ALLEN
WRENCH
M3 SET SCREW
SWIVEL
CONNECTOR
2
1: Rotate the Cody's head perpendicular to the arm making
sure the arm is completely inserted into the head swivel
connector. Tighten the M3 set screw on the swivel connector
with the provided 1.5mm Allen wrench to secure the head in
place.
A
1
HEAD
ARM 1.5MM ALLEN
WRENCH
M3 SET SCREW
SWIVEL
CONNECTOR
1
B
HEAD
2: Insert the loose arm assembly (provided in the box) into the
other swivel connector and insert the joining arm into the
mounting bracket of the first arm. Tighten the M3 set screw
on the swivel connector and mounting bracket with the
1.5mm Allen wrench.
HEAD
ARM
JOINING ARM
MOUNTING BRACKET
2
Install the Fixture