Collision warning, Collision warning with city braking function – BMW 335i xDrive Sedan 2014 User Manual

Page 103

Advertising
background image

At a glance

Button in the vehicle

Intelligent Safety button

Camera

The camera is located near the base of the
mirror.
Keep the windshield in the area behind the in‐
terior rear view mirror clean and clear.

Switching on/off

The Intelligent Safety systems are automati‐
cally active after each engine start via the start/
stop button.

Press the button: the systems are
switched off. The LED goes out.

Press the button: the systems are switched off.
The LED lights up.

Settings can be made on the Control Display.

Collision warning

Depending on how the equipment is equipped,
the collision warning system consists of one of
the two systems:

Collision warning with City Braking func‐
tion, refer to page

103

.

Collision warning with braking function, re‐
fer to page

106

Collision warning with City

Braking function

The concept

The system can help to prevent accidents. If
an accident cannot be prevented, the system
helps to reduce the collision speed.
The system issues a warning if there is immi‐
nent danger of a collision and if so brakes inde‐
pendently.
The automatic braking intervention is done
with limited force and duration.
The system is controlled via a camera in the
base of the mirror.
The collision warning is available even if cruise
control has been deactivated.
When the vehicle is intentionally brought close
to a vehicle, the collision warning is delayed to
avoid false warnings.

General information

The system issues a two-phase warning of a
danger of collision with vehicles at speeds
above approx. 3 mph/5 km/h. The time of these
warnings may vary depending on the current
driving situation.
Up to approx. 35 mph/60 km/h a braking inter‐
vention occurs when appropriate.

Seite 103

Safety

Controls

103

Online Edition for Part no. 01 40 2 925 743 - II/14

Advertising