BMW 335i xDrive Sedan 2014 - Manual (Page 209)

21-watt bulb, PY21W
1. In the wheel house, loosen the two brack‐
ets and remove the cover.
2. If necessary, pull the inside trim of the
wheel house slightly inward. Turn the bulb
holder counterclockwise and remove.
3. Press the bulb gently into the socket, turn
counterclockwise and remove.
4. Install the new bulb and bulb holder in re‐
verse order of removal.
5. Attach the cover to the wheel house.
Front fog lamps
Follow general instructions, refer to page 204 .
35-watt bulb, H8.
1. Use the handle of the screwdriver from the
onboard vehicle tool kit to remove the
three wheel house panel screws, arrow 1.
Carefully pull back the wheel house panel,
arrow 2.
2. Pull off the bulb connector, arrow 1.
Turn the bulb, arrow 2.
Left side of vehicle: turn clockwise.
Right side of vehicle: turn counterclock‐
wise.
Remove the bulb.
3. Insert the new bulb, connect the connector
and screw on the wheel house panel.
Turn signal in exterior mirror
Follow general instructions, refer to page 204 .
The turn signals in the exterior mirrors feature
LED technology. Contact your service center
in the event of a malfunction.
Seite 209
Replacing components Mobility
209
Online Edition for Part no. 01 40 2 925 743 - II/14