BMW ActiveHybrid 750Li 2011 User Manual
Page 119
Display
Heat image
For safety reasons, when driving at speeds
above approx. 3 mph/5 km/h and in low ambient
light, the image is only displayed when the low
beams are switched on.
A still image is displayed at regular intervals for
a fraction of a second.
Night Vision with pedestrian detection is not
available on the rear screen.
Pedestrian detection
Environmental influences can limit the availabil‐
ity of pedestrian detection. If pedestrian detec‐
tion is not available, a symbol is displayed in the
heat image.
This symbol disappears when the function be‐
comes available again.
The pedestrian detection and warning system
only operates in darkness and only when a heat
image is displayed.
Adjustments via the iDrive
With Night Vision switched on:
1.
Activate Night Vision with pedestrian detec‐
tion.
2.
Press the controller.
3.
Open the desired menu item.
▷
1: "Brightness"
▷
2: "Contrast"
▷
3: "Pedestrian detection"
The settings are stored for the remote control
currently in use.
Camera
Rain, dirt, snow, or ice can impair camera oper‐
ation.
The camera is automatically heated when the
external temperatures are low.
The camera is automatically cleaned together
with the headlamps.
Clean the lens, refer to page 252
Seite 119
119
Online Edition for Part no. 01 41 2 603 958 - 03 10 500