Tow-starting and towing, Breakdown assistance – BMW ActiveHybrid 750Li 2011 User Manual

Page 246

Advertising
background image

Engine start: 12 volt battery discharged

Never use spray fluids to start the combustion
engine.

1.

Start the engine of the assisting vehicle and
let it run for several minutes at an increased
idle speed.

2.

Start the engine of the vehicle receiving as‐
sistance as usual.
If the first starting attempt is not successful,
wait a few minutes before making another
attempt in order to allow the discharged bat‐
tery to recharge.

3.

Let both engines run for several minutes.

4.

Disconnect the jumper cables in the reverse
order.

Check the battery and recharge if necessary.

Engine start: high-voltage battery

discharged

Never use spray fluids to start the combustion
engine.

1.

Start the engine of the assisting vehicle and
let it run for several minutes at an increased
idle speed.

2.

Press the Start/Stop button without apply‐
ing the brake. This starts the charging pro‐
cedure.

3.

The charging procedure is complete as
soon as a corresponding message is dis‐
played in the instrument panel.

4.

Start the combustion engine of the vehicle
receiving assistance.

5.

Disconnect the jumper cables in the reverse
order.

Have the high-voltage battery checked if nec‐
essary.

Charging procedure interrupted

The charging procedure of the high-voltage bat‐
tery could be interrupted during engine start,
for instance because the vehicle providing as‐
sistance has not enough battery power:
Disconnect the jumper cables in the reverse or‐
der and contact the service center.

Tow-starting and towing

Tow fitting

The screw-in tow fitting should always be car‐
ried in the vehicle. It can be screwed in at the
front or rear of the BMW. It is located in the con‐
tainer on the inside of the trunk lid.

Tow fitting, information on use

Use only the tow fitting provided with
the vehicle and screw it all the way in.

Use the tow fitting for towing on paved roads
only.

Avoid lateral loading of the tow fitting, e.g.,
do not lift the vehicle by the tow fitting.

Otherwise, damage to the tow fitting and the ve‐
hicle can occur.◀

Screw thread

Push out the cover by pressing on the arrow
symbol.

Towing

General information

Light towing vehicle

Seite 246

246

Online Edition for Part no. 01 41 2 603 958 - 03 10 500

Breakdown assistance

Advertising
This manual is related to the following products: