Checking the wiper blades, Changing the wiper blades, 330 maintenance – FORD 2015 Explorer User Manual

Page 331

Advertising
background image

When a battery replacement is required, the battery should be replaced
with a Ford recommended replacement battery that matches the
electrical requirements of the vehicle. After battery replacement, or in
some cases after charging the battery with an external charger, the BMS
requires eight hours of vehicle sleep time (key off with doors closed) to
relearn the new battery state of charge. Prior to relearning state of
charge, the BMS may disable electrical features (to protect the battery)
earlier than normal.

CHECKING THE WIPER BLADES

Run the tip of your fingers over the edge of the blade
to check for roughness.

Clean the wiper blades with washer fluid or water
applied with a soft sponge or cloth.

CHANGING THE WIPER BLADES

1. Pull the wiper blade and arm away from
the glass.

2. Squeeze the locking tabs to release the
blade from the arm and pull the blade away
from the arm to remove it.

3. Attach the new blade to the arm and snap
it into place.

Replace wiper blades at least once per year
for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the
windshield.

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

330

Maintenance

2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA
(fus)

Advertising