Transmission, Manual transmission, Manual transmission - 2.0l duratec-he – FORD 2015 Focus User Manual

Page 144: Mi4), Manual transmission - 2.0l duratec-he (mi4)

Advertising
background image

MANUAL TRANSMISSION -
2.0L DURATEC-HE (MI4)

Using the Clutch

Note: Failure to fully depress the clutch
pedal to the floor may cause increased shift
efforts, prematurely wear transmission
components or damage the transmission.

Note: Do not drive with your foot resting on
the clutch pedal or use the clutch pedal to
hold your vehicle at a standstill while
waiting on a hill. These actions will reduce
the life of the clutch and could nullify a
clutch warranty claim.

E157512

Manual transmission vehicles have a
starter interlock that prevents cranking the
engine unless the clutch pedal is fully
depressed.

Starting Your Vehicle

WARNING

Make sure the floor mat is positioned
correctly so that it does not interfere
with the full extension of the clutch

pedal.

1.

Make sure the parking brake is fully set
and shift the gearshift lever to the
neutral position.

2. Fully depress the clutch pedal then

start the engine.

3. Press the brake pedal and shift the

gearshift lever to first or reverse gear.

4. Release the parking brake and slowly

release the clutch pedal while slowly
pressing on the accelerator.

During each shift, make sure you fully
depress the clutch pedal.

Recommended Shift Speeds

Note: Do not shift the gearshift lever to first
gear when your vehicle is moving faster than
15 mph (24 km/h). This will damage the
clutch.

We recommend you change gear
according to the following guide to achieve
the best fuel economy for your vehicle.

Recommended

speed

Shift from

15 mph (24 km/h)

1 - 2

24 mph (38 km/h)

2 - 3

32 mph (51 km/h)

3 - 4

44 mph (71 km/h)

4 - 5

Reverse

Note: Do not shift the gearshift lever to
reverse gear when your vehicle is moving.
This can cause damage to the transmission.

1.

Fully depress the clutch pedal to
disengage clutch.

2. Shift the gearshift lever to the neutral

position and wait at least three
seconds before moving it to reverse.

If reverse gear is not fully engaged, press
the clutch pedal down and shift the
gearshift lever to the neutral position.
Release the clutch pedal for a moment,
depress the clutch again and shift the
gearshift lever to reverse.

141

Focus (CDH), enUSA, First Printing

Transmission

Advertising