FORD 2015 Fusion - Manual (Page 109)

Action Message
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to Vehicle
Maneuvering
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to
Steering Wheel Maneuv-
ering
Engine may be on to support high demand for electrical
accessories, such as operating power windows, rear defroster,
or when using the power point.
Engine On due to
Accessory Usage
Engine is on to support normal vehicle operation. Includes
external vehicle conditions, such as altitude, traffic, low
ambient temperature. Also includes battery outside optimal
operating conditions (state of charge and temperature), and
inadequate brake vacuum (can occur if the brake pedal is
depressed a number of times in succession).
Engine On Normal Oper-
ation
Engine is on in order to increase the engine temperature to an
acceptable level.
Engine On due to Low
Temperature
Engine is on to support normal vehicle operation due to low
outside ambient temperature.
Engine On due to
Outside Air Temp
Engine is on in order to increase the engine temperature to an
acceptable level.
Engine On due to Engine
Warming
Engine is on due to a low gear selection by the transmission. Engine On due to
Selected Gear
Engine is on due to a steep road grade. Engine On due to Steep
Grade
Engine is on due to no key being detected by the vehicle. Engine On due to Key not
Detected
Engine is on due to the driver door being opened. Engine On due to Driver
Door Opened
Engine is on due to the driver seat belt being unbuckled. Engine On due to Driver
Belt Unbuckled
Engine is on to achieve or maintain interior compartment at
an acceptable level.
Engine On due to
Heating /Cooling
Engine is on, which is required to support the use of the power
outlet (110V).
Engine On due to Power
Outlet in Use
106
Fusion/Mondeo (CC7), enUSA
Information Displays