Blocked sensor, 220 cruise control – FORD 2015 Taurus User Manual

Page 221

Advertising
background image

Blocked Sensor

WARNING: Do not use ACC when towing a trailer with brake
controls. Aftermarket trailer brakes will not function properly

when ACC is activated because the brakes are electronically controlled.
Failing to do so may result in loss of vehicle control, which could result
in serious injury.

WARNING: Do not use tires sizes other than those
recommended because this can affect the normal operation of

ACC. Failing to do so may result in a loss of vehicle control, which
could result in serious injury.

A message regarding a blocked
sensor is displayed if the radar
signals from the sensor have been
obstructed. The sensor is located
behind a fascia cover near the driver
side of the lower grille. A vehicle
ahead cannot be detected and the
system will not function when the

radar signals are obstructed. The following table lists possible causes and
actions for this message being displayed.

Cause

Action

The surface of the radar in the
grille is dirty or obstructed in
some way.

Clean the grille surface in front of
the radar or remove the object
causing the obstruction.

The surface of the radar in the
grille is clean but the message
remains in the display.

Wait a short time. It may take
several minutes for the radar to
detect that it is no longer
obstructed.

Heavy rain or snow is interfering
with the radar signals.

Do not use the system in these
conditions because it may not
detect any vehicle ahead.

220

Cruise Control

2015 Taurus
Owners Guide gf, 1st Printing, April 2014
USA
(fus)

Advertising