Using the systems, Driving aids 229 – FORD 2015 Taurus User Manual

Page 230

Advertising
background image

Using the Systems

BLIS® turns on when the engine is started and the vehicle is driven
forward above 3 mph (5 km/h); it remains on while the transmission is in
D (Drive) or N (Neutral). If shifted out of D (Drive) or N (Neutral), the
system enters CTA mode. Once shifted back into D (Drive), BLIS® turns
back on when the vehicle is driven above 3 mph (5 km/h).

Note: BLIS® does not function in R (Reverse) or P (Park) or provide
any additional warning when a turn signal is on.

CTA detects approaching vehicles from up to 45 feet (14 meters) away
though coverage decreases when the sensors are blocked. Reversing
slowly helps increase the coverage area and effectiveness.

WARNING: To help avoid personal injury, NEVER use the CTA
system as a replacement for using the interior and exterior

mirrors and looking over your shoulder before backing out of a parking
space. CTA is not a replacement for careful driving.

In this first example, the left sensor is only partially obstructed; zone
coverage is nearly maximized.

Driving Aids

229

2015 Taurus
Owners Guide gf, 1st Printing, April 2014
USA
(fus)

Advertising