Adjusting the headlamps, Maintenance – FORD 2014 C-MAX Hybrid User Manual

Page 223

Advertising
background image

E130060

3

2

2. Slightly rotate the wiper blade from the

wiper arm

3. Disengage the wiper blade from the

wiper arm.

4. Remove the wiper blade.

5. Install in the reverse order.

Note: Make sure that the wiper blade locks
into place.

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment

The headlamps on your vehicle are
properly aimed at the assembly plant. If
your vehicle has been in an accident, the
alignment of your headlamps should be
checked by your authorized dealer.

E142592

8 feet (2.4 meters)

A

Center height of lamp to ground

B

25 feet (7.6 meters)

C

Horizontal reference line

D

1.

Park the vehicle directly in front of a
wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.

Note: To see a clearer light pattern for
adjusting, you may want to block the light
from one headlamp while adjusting the
other.

2. Measure the height of the headlamp

bulb center from the ground and mark
an 8 foot (2.4 meter) horizontal
reference line on the vertical wall or
screen at this height.

3. Turn on the low beam headlamps to

illuminate the wall or screen and open
the hood.

221

C-MAX (CCG)

Maintenance

Advertising
This manual is related to the following products: