Information displays – FORD 2014 C-MAX Hybrid User Manual

Page 94

Advertising
background image

Empower

Empower adds an engine on/off threshold
to the power demand gauge from
Enlighten. The threshold is shown as a blue
double outline. The gauge is designed to
show you how close you are to the gasoline
engine on/off threshold and how much
power you are requesting based on how
far you press the accelerator pedal.

When power demand is below the
threshold the vehicle is operating on
battery power only with the engine off, EV
is displayed and the gauge fill is shown in
blue.

When power demand exceeds the
threshold both the engine and the high
voltage battery provide power and the
gauge fill is white.

When power demand surpasses the amber
indicator, this level of demand and
associated fuel economy are shown in
amber.

Note: You can reset your average fuel
economy by pressing and holding the OK
button on the left hand steering wheel
controls.

MyView

You can choose what to display in this
view. Selecting Change MyView in the
options menu allows you to scroll through
two columns of content choices.

Press the up or down arrow to view
content.

Use the right and left arrows to move
between the left column content and
the middle column content.

The right column is reserved for the
Battery Gauge and the Fuel Gauge.

Once you have your desired content
showing in each column then press OK to
save. This becomes your new MyView
screen.

Unique content available in MyView:

Accessory Power— Indicates electrical
power demands from your vehicle’s
accessory systems. Accessories use
power but do not contribute to
propelling the vehicle. The gauge
separately displays power demand in
kilowatts (kW) for climate and other
accessories.

Climate includes the power being used by
high voltage climate control components
such as the electric A/C compressor and
the electric heater (Energi vehicles only)

Other includes all power being used by the
low voltage accessories (cabin fans,
headlights, heated seats, etc.).

Coolant Temp – Indicates engine
coolant temperature. At normal
operating temperature, the level
indicator will be white and will be in the
normal range (between H and C). If the
engine coolant temperature exceeds
the normal range, the level indicator
will change to red to indicate that the
engine is overheating. Stop the vehicle
as soon as safely possible, turn off the
vehicle and let the engine cool.

The thermometer indicator next to the
gauge will illuminate in blue or white to
indicate the following (not available for
Energi vehicles):

Blue thermometer - This indicates that
the hybrid system is not warm enough
to allow EV operation. The gasoline
engine will typically run continuously
when the indicator is blue.

92

C-MAX (CCG)

Information Displays

Advertising
This manual is related to the following products: