FORD 2014 Expedition v.1 - Manual (Page 35)

2. Locate the anchor webbing loop for the seating position.
• You may need to pull back the top of the hinged panel along the
bottom of the seat back to access the tether anchor.
3. Clip the tether strap through the anchor loop as shown. If the tether
strap is clipped incorrectly, the child safety seat may not be retained
properly in the event of a crash.
4. Tighten the child safety seat
tether strap according to the
manufacturer’s instructions. If the
safety seat is not anchored properly,
the risk of a child being injured in a
crash greatly increases.
34 Child Safety
2014 Expedition (exd)
Owners Guide gf, 1st Printing, June 2013
USA (fus)