Safety belt extension assembly, Safety belt height adjustment, 44 safety belts – FORD 2014 Explorer v.3 User Manual

Page 45

Advertising
background image

Safety Belt Extension Assembly

WARNING: Do not use extensions to change the fit of the
shoulder belt across the torso.

WARNING: Do not use extensions with an inflatable safety belt.

Safety belt extensions are vehicle-specific. See an authorized dealer to
make sure you obtain the proper safety belt extension for your vehicle.
Use only extensions manufactured by the same supplier as the safety
belt. A safety belt extension is not available for the inflatable safety belt.
Also, use the safety belt extension only if the safety belt is too short for
you when fully extended.

SAFETY BELT HEIGHT ADJUSTMENT

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a collision.

1. Adjust the height of the shoulder
belt so the belt rests across the
middle of your shoulder.

2. Slide the adjuster up to raise the
belt and push the button and slide it
down to lower the belt.

44

Safety Belts

2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA
(fus)

Advertising