Information displays – FORD 2014 F-150 Raptor v.2 User Manual
Page 107
Action
Message
Displays when a trailer connection becomes discon-
nected, either intentionally or unintentionally, and has
been sensed during a given ignition cycle. Disregard
this status if your vehicle is not equipped with a factory
installed trailer brake controller. This message may
appear when an aftermarket TBC is used even when
the trailer is connected.
TRAILER DISCONNECTED
Displays when the trailer sway control has detected
trailer sway.
TRAILER SWAY REDUCE
SPEED
Displays if there are certain faults in the vehicle wiring
and trailer wiring/brake system. See Towing a Trailer
WIRING FAULT ON TRAILER
4WD
Action
Message
Displays when a 4X4 system fault is present. See
Using Four-Wheel Drive (page 151).
CHECK 4X4
Displays when the 4X4 system is making a shift.
4X4 SHIFT IN PROGRESS
Displays when trying to select 4X4 LOW.
FOR 4X4 LOW APPLY BRAKE
Displays when 4X4 LOW is selected and the vehicle is
stopped.
FOR 4X4 LOW SHIFT TO N
Displays when 4X4 LOW is selected while the vehicle
is moving.
FOR 4X4 LOW SLOW TO 3 MPH
Displays when 2WD is selected from 4X4 LOW mode.
TO EXIT 4X4 LOW APPLY
BRAKE
Displays when 2WD is selected while the vehicle has
been stopped in 4X4 LOW.
TO EXIT 4X4 LOW SHIFT TO N
Displays when 2WD is selected while the vehicle is
operating in 4X4 LOW.
TO EXIT 4X4 LOW SLOW TO 3
MPH
May display when shifting to or from 4X4 LOW.
SHIFT DELAYED PULL
FORWARD
104
F150 (TF6) , enUSA
Information Displays