FORD 2014 F-150 Raptor v.2 - Manual (Page 295)

Rear
E166718
Note: Jack at the specified locations to
avoid damage to the vehicle.
1. Position the jack according to the
guides and turn the jack handle
clockwise until the wheel is completely
off the ground.
2. Remove the lug nuts with the lug
wrench.
3. Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the lug nuts until the
wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel
has been lowered.
4. Lower the wheel by turning the jack
handle counterclockwise.
5. Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page 293).
6. Stow the flat tire.
7. Stow the jack and lug wrench. Make
sure the jack is fastened so it does not
rattle when you drive.
8. Unblock the wheels.
E166719
1
3
5
4
6
2
Six lug nut wheel
E166720
1
3
5
7
6
4
2
Seven lug nut wheel
Stowing the flat or spare tire
Note: Failure to follow the spare tire
stowage instructions may result in failure of
the cable or loss of the spare tire.
1. Lay the tire on the ground with the
valve stem facing in the direction
specified on the Tire Changing
Instructions located with the jack
hardware.
292
F150 (TF6) , enUSA
Wheels and Tires