Maintenance – FORD 2014 F-550 v.1 User Manual

Page 248

Advertising
background image

E163758

5. Release the three clamps that secure

the cover to the air filter housing. Push
the air filter cover toward the center of
the vehicle and up slightly to release it.

6. Remove the air filter element from the

air filter housing.

7.

Install a new air filter element.

E163759

8. Replace the air filter housing cover and

secure the clamps. Be careful not to
crimp the filter element edges between
the air filter housing and cover and
ensure that the tabs on the edge are
properly aligned into the slots.

9. Slip the air tube onto the air filter

housing and tighten the air-tube clamp
bolt snugly, but do not overtighten it.

E163760

10.

Reconnect the mass air flow sensor
electrical connector to the outlet
tube. Make sure the locking tab on
the connector is in the “locked”
position (connector shown from
below for clarity).

245

Super Duty (TFA)

Maintenance

Advertising
This manual is related to the following products: