Post-crash alert system, Roadside emergencies – FORD 2014 F-550 v.3 User Manual

Page 210

Advertising
background image

4

1

3

2

E142665

1.

Remove the jumper cable from the
ground metal surface or connecting
point, if available.

2. Remove the jumper cable on the

negative (-) terminal of the booster
vehicle's battery.

3. Remove the jumper cable from the

positive (+) terminal of the booster
vehicle's battery.

4. Remove the jumper cable from the

positive (+) terminal of the disabled
vehicle's battery.

After the disabled vehicle has been started
and the jumper cables removed, allow it
to idle for several minutes so the battery
can recharge.

POST-CRASH ALERT SYSTEM

The system flashes the turn signal lamps
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the safety belt pretensioners.

The horn and lamps will turn off when:

The hazard control button is pressed

The panic button (if equipped) is
pressed on the remote entry
transmitter

Your vehicle runs out of power

207

Super Duty (TFA)

Roadside Emergencies

Advertising
This manual is related to the following products: