Using advancetrac, Stability control 183 – FORD 2014 Mustang v.1 User Manual
Page 184
![background image](/manuals/602027/184/background.png)
A Vehicle without AdvanceTrac®
skidding off its intended route.
B Vehicle with AdvanceTrac®
maintaining control on a slippery
surface.
USING ADVANCETRAC®
The system automatically is enabled when you start your engine. The
electronic stability control portion of the system is disabled when the
transmission is in position R or, on some models, if the stability control
button is pressed and held for more than five seconds when the brakes
are applied and the vehicle is at a stop. The traction control portion of
the system can be turned off independently. See the Traction Control
chapter.
AdvanceTrac® Features
Button
functions
Mode
Icon
status
ESC
TCS
Default at
start-up
—
On during
bulb
check
Enabled
Enabled
Button pressed
momentarily
Traction
control off
On
Enabled
Disabled
Stability Control
183
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)