FORD 2014 Mustang v.1 - Manual (Page 342)

Pairing a Phone for the First Time
Note: Make sure the vehicle ignition and radio are turned on and the
transmission is in position P (automatic transmission) or 1 (manual
transmission).
Wirelessly pairing your phone with SYNC allows you to make and receive
hands-free calls.
1. Press the PHONE hard button; when the display indicates no phone
is paired, press the Settings tab, then Add.
2. If Bluetooth is on, SYNC begins the pairing process between your
Bluetooth-enabled phone or device and SYNC. See your phone’s user
guide if necessary.
3. When prompted on your phone’s display, enter the six-digit PIN
provided by SYNC in the radio display.
4. The display indicates when the pairing is successful.
Depending on your phone’s capability and your market, the system may
prompt you with questions such as setting the current phone as the
primary phone (the phone SYNC automatically tries to connect with first
upon vehicle start-up), downloading your phone book, etc.
Pairing Subsequent Phones
Note: Make sure the vehicle ignition and radio are turned on and the
transmission is in position P (vehicles equipped with an automatic
transmission) or 1st gear (vehicles equipped with a manual
transmission).
Note: SYNC can store up to 12 previously paired phones.
1. Press the PHONE hard button; select the Settings tab, then Add.
2. When prompted on your phone’s display, enter the six-digit PIN
provided by SYNC in the radio display. The display indicates when
the pairing is successful.
3. The system then prompts with questions such as if you would like to
set the current phone as the primary phone (the phone SYNC
automatically tries to connect with first upon vehicle start-up),
download your phone book, etc.
SYNC® 341
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)