30 child safety – FORD 2014 Taurus v.1 User Manual

Page 31

Advertising
background image

Contact the manufacturer of your child seat for information about
ordering a tether strap, or to obtain a longer tether strap if the tether
strap on your safety seat does not reach the appropriate top tether
anchor in your vehicle.

Once the child safety seat has been installed using either the safety belt,
the lower anchors of the LATCH system, or both, you can attach the top
tether strap.

The tether strap anchors in your vehicle are in the following positions
(shown from top view):

Perform the following steps to install a child safety seat with tether
anchors:

Note: If you install a child seat with rigid LATCH attachments, do not
tighten the tether strap enough to lift the child seat off your vehicle seat
cushion when the child is seated in it. Keep the tether strap just snug
without lifting the front of the child seat. Keeping the child seat just
touching your vehicle seat gives the best protection in a severe crash.

1. Route the tether strap over the top of the head restraint.

2. Locate the correct anchor for the
selected seating position.

30

Child Safety

2014 Taurus
Owners Guide gf, 1st Printing, April 2013
USA
(fus)

Advertising