Battery saver, Securicode™ keyless entry keypad (if equipped), Programming a personal entry code – FORD 2014 Taurus v.1 User Manual

Page 73: Securicode™ keyless entry keypad, 72 locks

Advertising
background image

Battery Saver

If you leave the courtesy lamps, dome lamps or headlamps on, the
battery saver shuts them off 10 minutes after you switch the ignition off.

Accessory Mode Battery Saver for Intelligent Access Keys
(If Equipped)

If you leave your vehicle in the run ignition state, it will shut off once it
detects a certain amount of battery drain or after 45 minutes.

SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED)

The keypad, located near the driver window, is invisible until you touch
it. It then lights up so you can see and touch the appropriate buttons.

Note: If you enter your entry code too fast on the keypad, the unlock
function may not work. Enter your entry code again more slowly.

You can use the keypad to:

• lock or unlock the doors
• open the trunk
• recall memory features
• enable or disable the autolock

and autounlock

• arm and disarm the anti-theft

alarm (if equipped)

You can operate the keypad with the factory-set 5-digit entry code.
The code is located on the owner’s wallet card in the glove box and is
available from an authorized dealer. You can also create up to three of
your own 5-digit personal entry codes.

Programming a Personal Entry Code

To create your own personal entry code:

1. Enter the factory-set code.

2. Press the 1

2 on the keypad within five seconds.

72

Locks

2014 Taurus
Owners Guide gf, 1st Printing, April 2013
USA
(fus)

Advertising