Keys and remote controls – FORD 2013 Escape v.1 User Manual

Page 46

Advertising
background image

Integrated Keyhead Transmitter

E138619

1.

Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.

2. Remove the old battery.

E138620

3. Insert the new battery. Refer to the

instructions inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.

4. Snap the battery cover back onto the

transmitter.

Intelligent Access Transmitter

1.

Remove the backup key from the
transmitter.

E142432

2. Twist a thin coin in the slot hidden

behind the backup key slot to remove
the battery cover.

E138622

3. Remove the old battery.
4. Insert the new battery. Refer to the

instruction inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.

5. Snap the battery cover back onto the

transmitter and install the backup key.

Car Finder

E138623

Press the button twice within
three seconds. The horn will
chirp and the turn signals will

flash. It is recommended that this method
be used to locate your vehicle, rather than
using the panic alarm.

46

Keys and Remote Controls

Advertising