Keyless entry, Locks – FORD 2013 Escape v.1 User Manual

Page 60

Advertising
background image

KEYLESS ENTRY

(IF EQUIPPED)

SECURICODE™ KEYLESS ENTRY

KEYPAD

1 2

3 4

5 6

7 8

9 0

E138637

You can use the keypad to:

lock or unlock the doors

recall memory seat and mirror
positions (if equipped)

program and erase user codes

arm and disarm the anti-theft alarm.

The keypad can be operated with the
factory set 5-digit entry code. The code is
located on the owner’s wallet card in the
glove box and is available from your
authorized dealer. You can also create up
to five of your own 5-digit personal entry
codes.

Programming a Personal Entry Code

To create your own personal entry code:

1.

Enter the factory set code.

2. Press the 1·2 on the keypad within five

seconds.

3. Enter your personal 5-digit code. Each

number must be entered within five
seconds of each other.

4. For memory recall feature, enter the

sixth digit 1·2 to store driver 1 settings
or 3·4 to store driver 2 settings.

Note: Pressing 5·6, 7·8, or 9·0 keypad
numbers as a sixth digit will not recall a
driver memory setting.

Note: The factory-set code cannot be
associated with a memory setting.

5. The doors will lock then unlock to

confirm that your personal entry code
has been programmed.

You may also program a personal entry
code through the MyFord Touch® system
(if equipped). See General Information
(page 326).

Tips:

Do not set a code that uses five of the
same number.

Do not use five numbers in sequential
order.

The factory set code will work even if
you have set your own personal code.

Erasing a Personal Code

1.

Enter the factory set 5-digit code.

2. Press and release the 1·2 on the keypad

within five seconds.

3. Press and hold the 1·2 for two seconds.

This must be done within five seconds
of completing Step 2.

All personal codes are now erased and only
the factory set 5–digit code will work.

Anti-Scan Feature

The keypad will go into an anti-scan mode
if the wrong code has been entered seven
times (35 consecutive button presses).
This mode disables the keypad for one
minute and the keypad lamp will flash.

60

Locks

Advertising