Repairing minor paint damage, Waxing, Cleaning the engine – FORD 2013 Escape v.2 User Manual

Page 241: Vehicle care

Advertising
background image

Wash the vehicle first, using cool or
lukewarm water and a neutral pH
shampoo, such as Motorcraft® Detail
Wash.

Use Motorcraft® Custom Bright Metal
Cleaner. Apply the product as you
would a wax to clean bumpers and
other chrome parts; allow the cleaner
to dry for a few minutes, then wipe off
the haze with a clean, dry rag.

Do not apply cleaning product to hot
surfaces and do not leave cleaning
product on chrome surfaces for a
period of time exceeding that which is
recommended.

Using other non-recommended
cleaners can result in severe and
permanent cosmetic damage.

Underbody

Flush the complete underside of your
vehicle frequently. Keep body and door
drain holes free from packed dirt.

Cleaning Plastic Exterior Parts

Use only approved products to clean
plastic parts

For routine cleaning, use Motorcraft®
Detail Wash.

If tar or grease spots are present, use
Motorcraft® Bug and Tar Remover.

REPAIRING MINOR PAINT
DAMAGE

Your authorized dealer has touch-up paint
to match your vehicle’s color. Take your
color code (printed on a sticker in the
driver’s door jamb) to your authorized
dealer to ensure you get the correct color.

Remove particles such as bird
droppings, tree sap, insect deposits, tar
spots, road salt and industrial fallout
before repairing paint chips.

Always read the instructions before
using the products.

WAXING

Wash the vehicle first.

Use a quality wax that does not contain
abrasives.

Do not allow paint sealant to come in
contact with any non-body (low-gloss
black) colored trim, such as grained
door handles, roof racks, bumpers, side
moldings, mirror housings or the
windshield cowl area. The paint sealant
will “gray” or stain the parts over time.

CLEANING THE ENGINE

Engines are more efficient when they are
clean because grease and dirt buildup keep
the engine warmer than normal.

When washing:

Take care when using a power washer
to clean the engine. The high-pressure
fluid could penetrate the sealed parts
and cause damage.

Do not spray a hot engine with cold
water to avoid cracking the engine
block or other engine components.

Spray Motorcraft® Engine Shampoo
and Degreaser on all parts that require
cleaning and pressure rinse clean. In
Canada, use Motorcraft® Engine
Shampoo.

Never wash or rinse the engine while it
is hot or running; water in the running
engine may cause internal damage.

238

Vehicle Care

Advertising