FORD 2013 Escape v.4 - Manual (Page 132)

(
Saving a Pre-Set Position
1. Switch the ignition on.
2. Adjust the seat and exterior mirrors to
your desired position.
3. Press and hold the desired memory
button until you hear a single chime.
Recalling a Pre-Set Position
Press and release the memory button
associated with your desired driving
position. The seat and mirrors will move to
the position stored for that pre-set.
Note: Pressing any driver seat adjustment
control, any of the memory buttons or any
mirror control switch will stop seat
movement during a recall. Seat memory
recall is not allowed while the vehicle is
moving.
REAR SEATS
(
Folding the Seat back
With the seat empty, pull the lever up to
fold the seat back forward. You may need
to fold the outboard head restraints and
lower the center head restraint first.
Unfolding the Seat back
Pull the seat back upward to unfold the
seat back.
Recline Adjustment
(If Equipped)
With the seat occupied, pull the lever up
to recline the seat back.
128
Escape (TM2)
Seats