FORD 2013 Expedition v.2 - Manual (Page 35)

2. Locate the anchor webbing loop for the seating position.
• You may need to pull back the top of the hinged panel along the
bottom of the seat back to access the tether anchor.
3. Clip the tether strap through the anchor loop as shown. If the tether
strap is clipped incorrectly, the child safety seat may not be retained
properly in the event of a crash.
4. Tighten the child safety seat
tether strap according to the
manufacturer’s instructions. If the
safety seat is not anchored properly,
the risk of a child being injured in a
crash greatly increases.
If your child restraint system is equipped with a tether strap, and the
child restraint manufacturer recommends its use, Ford also recommends
its use.
34 Child Safety
2013 Expedition (exd)
Owners Guide gf, 2nd Printing, October 2012
USA (fus)