FORD 2013 Expedition v.3 - Manual (Page 177)

Returning to the upright position from full lowered load floor
position
You cannot return the seat back to the upright position until the seat is
returned from the kneel down position. To return the seat to the upright
position:
1. Push the seat rearward until the
latch is engaged.
2. Return the seat back to the
upright position.
Adjusting the Second Row Outboard 40% Seat for E-Z Entry
WARNING: Always latch the vehicle seat to the floor, whether
the seat is occupied or empty. If not latched, the seat may cause
injury during a sudden stop.
WARNING: After using the E-Z Entry feature make sure there
are not any objects, cargo or the feet of a third row occupant
under the second row seat when latching the seat to the floor. Injury to
the third row occupants feet or damage to the seat may occur.
WARNING: Before returning the seat back to its original
position, make sure that cargo or any objects are not trapped
behind the seat back. After returning the seat back to its original
position, pull on the seat back to make sure that it has fully latched. An
unlatched seat may become dangerous in the event of a sudden stop or
crash .
The E-Z entry seat allows for easier entry and exit to and from the third
row seat.
176 Seats
2013 Expedition (exd)
Owners Guide gf, 3rd Printing, April 2013
USA (fus)